
Product description
pHulvic goes in the tank before anything else and brings hard, alkaline well water down to the pH where most pesticides hold up longer. A lot of the well water in Florida comes out of the ground above pH 7, and many pesticides break down faster in alkaline water.
What growers get
- Brings spray water into the pH 4 to 5.5 range, which extends the half-life of most pesticides
- Non-ionic surfactants for more uniform droplets and better coverage
- Cuts foam in a lot of common tank mixes
- Compatible with most of the chemicals used in custom application
- Contains 1% fulvic acid from plant extracts
Always read and follow the product label for rates, timing, and precautions.
| Nutrient | Guaranteed amount |
|---|---|
| Active ingredient: | |
| Citric Acid | 33.0% |
| Contains beneficial substances: | |
| Fulvic Acid | 1.0% |
Derived from
Citric acid from citric acid; fulvic acid from plant extracts.
Product facts
- Weight per gallon
- 9.45 lbs
- Package
- 2.5 gallons (9.46 L)
- Storage
- Store above 32°F. Keep in a corrosion-resistant container such as polypropylene or polyethylene.
- Signal word
- WARNING. Causes skin irritation and serious eye irritation. May be corrosive to metals. Read the label and SDS before use.
Where it fits
Strawberries and tomatoes
Growers on a tight fungicide schedule, mixing every load with farm well water.
Custom applicators
One product that buffers the water, spreads the spray and knocks down foam.
Rate chart
| If water pH is | pHulvic per 100 gal water | Changes pH to approx. |
|---|---|---|
| 9.0 | 6 oz | 6.5 |
| 9.0 | 10 oz | 5.0 |
| 8.0 | 4 oz | 6.4 |
| 8.0 | 6 oz | 5.5 |
| 7.4 | 3 oz | 6.2 |
| 7.4 | 4 oz | 5.8 |
| 7.4 | 6 oz | 4.9 |
| 7.4 | 7 oz | 4.5 |
| 6.4 | 1.5 oz | 5.8 |
| 6.4 | 3 oz | 5.1 |
| 6.4 | 4 oz | 4.8 |
| 6.4 | 5 oz | 4.3 |
Directions for use
In most cases, add pHulvic to the water before adding pesticides or other materials to the spray tank. Use conditions can change how much pHulvic you need. If you don't know the mixing order, check compatibility and mixing order in a small container first.
Frequently asked questions
What pH should spray water be for pesticides?
The pHulvic label targets 4 to 5.5, which extends the half-life of most pesticides. Check the pesticide label too. A few products, including some sulfonylurea herbicides, hold up better in neutral or alkaline water.
When do I add pHulvic to the tank?
Add it to the water first, before pesticides or other materials.
How much pHulvic do I need?
It depends on where your water starts. Water at pH 8.0 drops to about 5.5 with 6 oz per 100 gallons. The rate chart on this page covers other starting points.
What's in pHulvic?
Citric acid at 33%, non-ionic surfactants, and 1% fulvic acid from plant extracts.
Talk to our team.
Growers connect with field agronomists. Retailers and distributors head to Partners. Either way, you can reach us directly at 1-813-752-4950.

